Give your Indian Scout the aggressive look it needs with these iconic V-Line handlebars. Seamless DOM mild steel construction with black powder-coated or chrome finish....
13" Brake Rotor Caliper Mounts • All billet T6061 aluminum precision machined. • Allows factory brake calipers to to be used with 13" rotors • Proudly...
TRASK: 19+ SOFTAIL DERBY COVER REPAIR KIT FOR USE IN TM-0042 DERBY COVERS ALL COLORS.INCLUDES WINDOW, O-RINGS AND HARDWARE. * 1 R-TM-0040-3 CLEAR ACRYLIC COVER*...
58mm Velocity Stack For ASSAULT Charge Air Cleaner | TM-1020-9BP
$69.95
Specifically intended for those using the 58mm aftermarket throttle bodies.
Polished Finish.
Made from 6061 Aluminum.
Will only fit Throttle-By-Wire TM-1020(BK/CH/RC/R) air cleaners.
AIM VARIABLE CLUTCH VP-SDR SERIES With the OEM 2013, 2017-2018 M8 springs, it handles up to 140 lbs-ft of torque. Screamin' Eagle springs will result in higher...
AIM Assist M8 Variable Pressure Clutch VP-SDR V2 MAX
$385.00
AIM VARIABLE PRESSURE CLUTCH M8 VP-SDR V2 MAX Features: With the OEM 2013, 2017-2018 M8 springs, it handles up to 160-170 lbs-ft of torque. Screamin'...
AIM Assist Twin-Cam Variable Pressure Clutch VP68 IV | TM-3011
$309.95
VP68 IV Easy Pull Clutch for '98 and later BT 40% Clutch lever pull reduction. 15 minute installation. Install through the derby cover without removing the...
AIM Assist Twin-Cam Variable Pressure Clutch VP84 IV | TM-3012
$309.95
AIM Assist Twin-Cam Variable Pressure Clutch VP84 IV 20% More clamping force at high RPM 20% Lighter clutch pull Smoother shifting, easier to find neutral...
AIM Twin-Cam Variable Pressure Clutch VP95 IV | TM-3013
$309.95
AIM variable clutch VP95 IV 40% More clamping force at high RPMs Smoother shifting, easier to find neutral Easy insulation through derby cover Highly recommended...
Meticulously hand built, our Assault Exhausts are TIG welded, then mandrel bent, making each one an excellent piece of craftsmanship. Our Flagship exhaust system, with...
Meticulously hand built, our Assault Exhausts are TIG welded, then mandrel bent, making each one an excellent piece of craftsmanship. Our Flagship exhaust system, with...
Trask Performance Assault Glide T-Shirt features the #74 Turbo Road Glide which was the first in the series of our Assault Glide builds. The ultimate...
The Assault Series Floorboards are a nice addition to your performance bagger. With their moto-inspired looks and solid billet construction, these floorboards are sure to...
Billet male foot peg mounts, designed specifically to mount the Assault Series foot pegs.
Made from lightweight 6061 billet aluminum.
Proudly made in the U.S.A.
Trask's Assault Series Large Platform Foot Pegs feature a billet interface for a solid and secure engagement to the peg, allowing for precise indexing. Made...
A must-have companion for your 09’-22’ Trask Billet Swing Arm if planning to install radial brake calipers. This bracket allows you to install a radial caliper...
A must-have for any 00-05 Delphi F.I Harleys. Replaces the brittle stock fuel pressure regulator housing that is prone to cracking, resulting in low fuel...
Replace it before you break it! Designed to handle engine builds making excess of 300 horsepower. Strongly recommended for engines producing 100 horsepower or more....